Rev your home entertainment into top gear with the Integra DRX-5.2. This powerhouse A/V receiver delivers enveloping object-based sound in your home theater and pristine whole-house audio at the touch of a button. If you're seeking the ultimate engine to drive your custom installation, look no further.


Integra Power

The DRX-5.2 combines accurate, noise-free signal processing with high-current power for dynamic speaker control. The result is pure, rich and authentic sound. Integra's dynamic audio amplification continuously delivers 180 Watts per channel (6 Ohms, 1 kHz, 1% THD, 1 Channel Driven, IEC) with 40 amps of high instantaneous current capability.


THX® Certified Select™

The DRX-5.2 is Certified Select by THX. THX spends 40-60 hours testing over 2000 data points ensuring that the DRX-5.2 is capable of meeting rigorous audio and video performance standards for reference level, distortion free playback and includes THX Loudness Plus technology to bring out intricate details at lower listening levels.


Smooth Analog Signal

A step up in the DRX series, VLSC (Vector Linear Shaping Circuitry) is applied to Front L/R channels to remove pulse noise generated in D/A conversion and allows the sound wave to be reproduced with extremely high fidelity for a smooth analog signal.


Powered Zones 2 & 3 with Zone 2/3 Pre-/Line Outs

The DRX-5.2 features Powered Zones 2 and 3 to bring audio to speakers connected to the receiver into a second room or third room. Zone 2 Pre/Line Out is also included for use with an outboard amp. Zone 2 Pre/Line Out, for HDMI Inputs 1 through 3, is also included for use with an outboard amp. The DRX-5.2 also includes a Zone 2 DAC (supporting all HDMI inputs), Coax and Optical Inputs (2-CH PCM), Network (including Spotify*), and USB audio sources. The DRX-5.2 also includes a Whole House Audio Mode- which allows you to turn on and synchronize all audio zones with a single button push of a single button- Now that's convenience!

*Availability of service depends on region.


HDBaseT Port for Multimedia Distribution

HDBaseT transmitts audio and video signals clearly up to 328 feet utilizing cat5e/cat6 cable to any certified third party HDBaseT receiver or device that has its own power supply. This makes long distance runs to projectors or a second zone easy and reliable.


Object-Based Sound Up to 7.2.4 Channels

Supports Dolby Atmos and DTS:X for an immersive three-dimensional sound-space through 7.2.2 or 5.2.4 channels. Connect an outboard power amp via 11.2-multichannel pre-outs and enjoy seamless top-to-bottom, side-to-side, and front-back coverage with four in-ceiling speakers and seven floor-standers. Individual sounds aren't tied to channels and move naturally around your audience.

Additionally, the Dolby surround up-mixer processes content not mixed for Dolby Atmos to fill the flexible speaker layouts of a Dolby Atmos system.

Learn More About Dolby Atmos

Learn More About DTS:X


UltraHD / HDR Connectivity

The DRX-5.2's HDMI specifications and HDCP 2.2 compatibility support the latest formats being released by Hollywood. The latest HDMI specs offer a significant increase in bandwidth (up to 18Gbps) to for full UltraHD support of features such as 4:4:4 color space and 4K@50/60 (2160p), which is 4 times the clarity of 1080p/60 video resolution. The DRX-5.2 also effortlessly upscales 1080p video to stunning 4k UltraHD.

Further, front HDMI is available for easy connection of a video camera or game console, while a rear Sub/Zone 2 Output is ideal for connecting a projector.The DRX-5.2 also effortlessly upscales 1080p video to stunning 4k UltraHD.


Works with Sonos*

Once the receiver is connected to Sonos Connect, any music or source can be sent from the Sonos app to the receiver. The receiver can be grouped to other Sonos devices on the network or it can be used independently.

*Requires a free firmware update.


Chromecast built-in with the Google Assistant

Chromecast built-in makes it super easy to stream music from your smartphone, tablet, Mac® or Windows® laptop, or Chromebook to the Integra DRX-5.2. Control playback, create party modes and connect with other Chromecast bulit-in devices by simply using your voice via Google Home or the Google Home App to share and control content throughout the home with ease.

Furthermore, devices with the Google Assistant built-in, can control music on the DRX-5.2 by voice as well.

How to Set-up & Use Chromecast built-in


Stream It Easy

The DRX-5.2 has Chromecast built-in for audio and Apple AirPlay technologies built in. Stream virtually any audio from a smartphone, tablet or PC to your home theater for powerful sound.

With Amazon Music, Spotify, Deezer(Deezer HiFi*) and TuneIn built-in**, you can select a station and search for music available on these services via the Integra Control Product app & Integra Music Control app (for Amazon Music) on your smartphone or tablet. The free Integra Control Pro app puts a range of streaming options at your fingertips, from universal Hi-Res Audio via network-attached devices to internet streaming services to music on your smartphone and tablet.

*Requires a firmware update. **Availability of services depends on region.

For a list of FlareConnect™-compatible external audio inputs by model, click here.


App Control

The Integra Control Pro app for iPod touch®/iPhone,® Android, and Kindle devices is a convenient way to control your home entertainment from anywhere within wireless range. The app has a clear graphical interface to control playback, adjust settings and handle content across multiple zones. The app serves hi-res, lossless, and compressed audio files (including 192 kHz/24-bit FLAC, DSD, Apple Lossless, Dolby® TrueHD and more) to the DRX-5.2 from your mobile devices, and gives it stunning sound.

   


384 kHz/32-bit Hi-Grade DAC

No matter what you're listening to, it will sound powerfully full, clean and clear. A premium-quality AK4458 digital-to-analog converter from Asahi Kasei implements unique low-distortion filtering technologies for clear sound, and unlocks the full potential of any audio format, including compressed, lossless, and hi-res audio (MP3, WMA, FLAC, WAV, AAC, Apple Lossless, AIFF, DSD 11.2 MHz, and Dolby TrueHD).


AccuEQ Advance

AccuEQ Advance conducts two measurements- one to set the level, the other to set the distance and crossover for ALL speakers, including the subwoofer. In the second round of measurements, your room’s sonic characteristics are evaluated. Using this information, AccuEQ is able to prevent standing waves from forming by adjusting frequency response. The technology also detects and compensates for background noise, such as the hum from an HVAC, to ensure accurate equalization.

Choose to include or bypass EQ measurement for front left and right speakers, and choose to automatically or manually set the EQ. Further, you can save your own manual EQ settings into three available presets.

The new AccuReflex technology aligns the phase of upfiring "height" speakers with the sound coming directly from your
other speakers. Any delay is resolved so that everything arrives at your ears at the same time. The result is cohesive
reproduction of object-based soundtracks.

Learn more


Perfect for Custom Installation

Integra products are designed and engineered to meet the demands of custom audio/video systems installers. Besides Recall with Lock / Unlock and PC Software Support, the DRX-5.2 includes system integration connectivity such as RS232 and IP control with support for 2-way communication with 3rd party home automation systems. A pair of infrared (IR) inputs and an IR output make for a clean, reliable installation and allow pass-through of IR signals to control other devices connected to the DRX-5.2, such as a TV or Blu-ray player. Three fully programmable 12 volt triggers can be used to raise/lower a projection screen, power on/off an external amplifier and open/close the drapes all with the touch of a button. Optional rack mount kits for all full size models provide a clean, finished look when installed in racks and cabinets, especially with the unit's aluminum faceplate. Integra works closely with control systems partners such as Savant, Crestron, URC, RTI, and Ihiji and supports Control4 Simple Device Discovery Protocol (SDDP) and AMX Device Discovery for simplified system integration.

AMPLIFIER:
# Channels 9.2
POWER (6 Ω, 1 kHz, 1%, IEC) / CH
POWER (6 Ω, 1 kHz, 10%, JEITA) / CH
180
215
Amplifier Frequency Response 5Hz - 100kHz
Wide Range, High Current Power Supply Natural Harmonics Technology, Massive High-Power Transformer
High Instanteneous Current Capability 40 Amps, 1kHz, 0.1 Ω, 1Pulse
THX Certified
Continuous 6 Ω Rated
Low Impedance Drive- Certified 4 Ω
Hand Selected Parts to Ensure Low Impedance Performance Custom- Audio Tuned
Discrete Output Stages for All Channels Discrete 2-Stage
All Channels Equal Power Output
PUSH-PULL Amplifier Design
Separate Digital and Analog Circuitry to Reduce Interference
Independent Power Supply 2
Bi-amp Capability - Front L/R Channels
PROCESSING:
Dolby Atmos and Dolby Surround
Dolby TrueHD
DTS:X and DTS Neural:X
DTS-HD Master Audio
THX Processing Modes & Loudness Plus
VLSC for Noise Free Signal Path ✓ (Front Channels)
AccuEQ Automatic Room Calibration Advance w/AccuReflex
GAME Surround Modes (Rock, Action, Sports, Role Play)
Advanced Music Optimizer to Enhance Compressed Audio Files
Standing Wave EQ
Premium Quality Digital-to-Analog Conversion 384k / 32-bit AKM4458 Differential DAC
32-Bit DSP Chip for Advanced Processing
Ultra-Low-Jitter Circuitry to Improve Audio
Adjustable Crossover by Channel Pair 40/45/50/55/60/70/80/90
100/110/120/130/150/180/200 Hz
Accurate Speaker Distance Setting 0.1 - foot
A/V Sync Delay (by Source) -100 to +500 ms
CONNECTIVITY:
HDMI Inputs / Output(s) 7 / 2
4K / 60 Hz 4:4:4 Colorspace Support ✓ (Front HDMI input does not support 4K/60Hz/RGB/4:4:4/4:2:2)
HDCP 2.2 Copy-Protection Compatibility
Dolby Vision, HDR10 Support
HLG (Hybrid Log Gamma), HDR10, WCG (Wide Color Gamut) Support
HDMI Support for BT.2020
HDMI Support for 3D, Audio Return Channel and CEC
Enhanced Audio Return Channel (eARC)
HDMI Support for Deep Color, x.v.Color, LipSync
HDMI Support for DVD-Audio, SACD, Multichannel PCM
Front Panel HDMI Input
HDBaseT Output
HDBaseT 4K / 60p / 4:4:4 Support
HDBaseT Dolby Vision, HLG, WCG, POC Support
HDBaseT IR / RS-232 Pass-through
Analog to HDMI Upconversion From 480p / 576i
4K Upscaling from 1080p
Component Video Inputs 2
Composite Video Inputs 2
Digital Audio Inputs (COAX / OPT) 1 / 2
Analog Audio Inputs 8
Phono Input
Front Panel A/V Input
Analog Pre-outs 11.2
Subwoofer Outputs 2
NETWORK / USB:
Works with Sonos ✓ (requires FW update & Sonos Connect)
Google Chromecast built-in
Google Assistant (Voice Control)
FlareConnect Wireless Multi-Room Audio Streaming Technology
DTS Play-Fi
DTS Play-Fi App for iOS and Android Integra Music Control
App Control via iOS and Android-Powered Devices Integra Control Pro
Apple Airplay
iPod / iPhone / iPad Ready
Home Network Music Streaming
TIDAL High Fidelity Music Streaming*
Amazon Music* **
Spotify*
Spotify Connect*
TuneIn Radio*
Deezer*(Deezer HiFi**)
DSD Support 2.8, 5.6, 11.2 MHz
Dolby TrueHD Support
Apple Lossless (ALAC) Support
WAV Support
AIFF Support
DSDIFF Support
FLAC Support
MP3 Support
USB Input for Streaming Audio
WiFi Certified
Bluetooth
Firmware Updates via Network and USB
*Availability of service depends on region. **Requires a free firmware update
MULTIZONE:
Powered Zone 2
Powered Zone 2 A / B
Powered Zone 3
Fixed or Variable Zone 2 Line Out
Fixed or Variable Zone 3 Line Out
Zone 2 Video Output HDMI
Zone 2 OSD
Zone 2 Audio DAC HDMI (2CH PCM), Coax, Optical, NET, USB
Zone 3 Audio DAC NET, USB, Whole House Mode
Whole House Mode HDMI (2CH PCM), Coax, Optical, NET, USB, Analog
Remote Play Zone- Selectable
INTEGRATION ACCESS:
Bi-directional RS-232 Control Port
Bi-directional Ethernet Control Port
Rear Panel IR Input / Output 2 / 1
RIHD (Remote Interactive over HDMI)
12V Trigger (with Adjustable delay) x3, Assignable
MISCELLANEOUS:
High-grade Construction
GUI for Setup Menu ✓ (Advanced HD)
Quick Setup Menu
Input Name Edit Fully Customizable
HDMI Standby "Through" Mode Assignable
Dealer Settings Memory Store & Recall Function
Screensaver Function ✓ (Advanced)
Hybrid Standby to Reduce Power Consumption
Smart Grid Ready
Anti-Resonant Aluminum Front Panel
Gold-Plated RCA Terminals
Oversized Detachable AC Cord
Rack Mount Kit Available IRK-180-4C
AMPLIFIER SECTION:
Power Output (6 Ω, 1 kHz, 1% THD, 1 Channel Driven, IEC)
Power Output (6 Ω, 1 kHz, 10% THD, 1 Channel Driven, JEITA)
180 W / Channel (6 Ω)
215 W / Channel (6 Ω)
Dynamic Power 250W / Channel (3 Ω)
220W / Channel (4 Ω)
130W / Channel (8 Ω)
THD (Total Harmonic Distortion + Noise) 0.08% (20 Hz-20 kHz, Half Power)
Input Sensitivity and Impedance 200 mV / 47 k-Ω (LINE)
3.5 mV / 47 k-Ω (Phono MM)
Rated RCA Output Level and Impedance 1 Vrms / 470 Ω (Subwoofer Pre Out)
1 V/200 mV/470 Ω (Zone pre/line out)
Phono Overload 70 mV (MM 1 kHz, 0.5%)
Frequency Response 5 Hz - 100 kHz / +1 dB-3 dB (Direct Mode)
Tone Control ±10dB, 20 Hz (Bass)
±10dB, 20 kHz (Treble)
Signal-to-Noise Ratio 106 dB (Line, IHF-A)
80 dB (Phono)
Speaker Impedance 4 Ω - 16 Ω
VIDEO SECTION:
Input Sensitivity / Output Level and Impedance 1.0 Vp-p / 75 Ω (Component Y)
0.7 Vp-p / 75 Ω (Component Pb/Pr)
1.0 Vp-p / 75 Ω (Composite)
TUNER SECTION:
Tuning Frequency Range FM 87.5 MHz - 108 MHz
FM 87.5 MHz - 107.9 MHz (Taiwan Model)
AM 522/530 kHz - 1,611/1,710 kHz
AM 530 kHz - 1,710 kHz (Taiwan Model)
FM / AM Preset Memory 40 Stations
GENERAL:
Power Supply AC 220–240 V, 50/60 Hz
AC 120 V, 60 Hz (Taiwan Model)
Power Consumption 870 W
850 W (Taiwan Model)
Stand-by Power Consumption 0.15 W
Dimensions (W X H X D) 435 x 198 x 388.5 mm
Weight 14.0 kg
CARTON:
Dimensions (W X H X D) 570 x 322 x 467 mm
Weight 17.0 kg
TOP